Basic copy operation
3.6
Specifying a Zoom setting
The zoom ratio can be set in order to make a copy on paper with a size dif-
ferent than the document or to enlarge or reduce the size of the copy image.
The following procedures describe how to specify the Zoom setting.
Note
The factory default setting is "×1.0". The "Auto Zoom" and "Auto Paper
Select" settings cannot be selected together. If the "Auto Zoom" setting
is selected while the "Auto Paper Select" setting was selected, the Paper
screen appears. In the Paper screen, specify the desired Paper setting.
Automatically selecting the zoom ratio ("Auto Zoom" setting)
The most appropriate zoom ratio is automatically selected based on the size
of the loaded document and the specified paper size.
1
In the Basics screen, touch [Zoom].
The Zoom screen appears.
2
Touch [Auto Zoom].
250/350
3
3-27