Configuration Example - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can use macro variables in XML URLs. The following macro variables are
supported:
• User ID—UID1, UID2
• Display name—DISPLAYNAME1, DISPLAYNAME2
• Auth ID—AUTHID1, AUTHID2
• Proxy—PROXY1, PROXY2
• MAC Address—MA
• Product Name—PN
• Product Series Number—PSN
• Serial Number—SERIAL_NUMBER
Click Submit All Changes.

Configuration Example

You want to configure the Cisco SPA525G/525G2 phone with softkey that, when
pressed, dials the Sales Department's extension (200). You want this button to
display on the far lower left of the screen when the phone is idle, when the phone
is off hook, or when the phone is connected on a call. You want the outbound call
(that is going to the speed dial) to originate from the second extension on the
user's phone, not the primary extension.
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Programmable Softkey Enable, choose yes.
In the Programmable Softkeys section, edit the following:
• Programmable Softkey Enable: yes
• PSK1: fnc=sd;ext=200@$PROXY;vid=2;nme=Sales
3
68