Call Feature Settings - Cisco SPA303 Administration Manual

Hide thumbs Also See for SPA303:
Table of Contents

Advertisement

Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Voice Quality Report Address

Call Feature Settings

Parameter
Blind Attn-Xfer Enable
MOH Server
Description
For configuration of a SIP event package, SIP PUBLISH,
that enables the collection and reporting of metrics
that measure the quality for VoIP sessions. Voice call
quality information derived from RTCP-XR and call
information from SIP is conveyed from a User Agent in
a session to the third party in SIP PUBLISH method.
To configure, first configure RTCP-XR (see the
Parameters" section on page
need to configure the RTCP Tx Interval. In the Voice
Quality Report Address field, enter the name of the
collector that will collect the statistics from the SIP
PUBLISH events. For example, enter collector@
qualified-domain-name
or
collector
@
IP
-
address
After RTCP-XR feature is enabled, the call status
information is updated on the Voice > Info page during
an active call. Additionally, RTCP-XR packets
containing a voice metrics block report will be sent
with the interval specified in the RTCP Tx Interval.
When the call session is ended, a SIP PUBLISH with
voice metrics info is sent to the collector endpoint.
Description
Enables the IP phone to perform an attended transfer
operation by ending the current call leg and
performing a blind transfer of the other call leg. If this
feature is disabled, the IP phone performs an attended
transfer operation by referring the other call leg to the
current call leg while maintaining both call legs. To use
this feature, select yes. Otherwise, select no.
Defaults to no.
User ID or URL of the auto-answering streaming audio
server. When only a user ID is specified, the current or
outbound proxy is contacted. Music-on-hold is
disabled if the MOH Server is not specified.
Defaults to imusic when used with a Cisco SPA 9000 IP
PBX.
"RTP
247). For example, you
(collector@reports.cisco.com)
(collector@192. 1 68.5. 1 ).
B
fully-
301

Advertisement

Table of Contents
loading

Table of Contents