Configuring On-Demand Ring Tones (Cisco Spa525G/525G2) - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Ring Tones
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
On the IP phones, user-downloaded ring tones are labeled User 1 and User 2 in
the choices for the Default Ring. On the phone ring tone menu, the User 1 and 2
choices are replaced by the corresponding name of the ring tone. "Not Installed"
appears if the user ring tone slots are not used.
For ring tone User 1 and User2, the cadence is fixed with the on-time equals to the
duration of the ring tone file and off-time equals to four seconds. The total ring
duration is fixed at 60 seconds. The user ring tone names displayed on the phone
LCD are derived from the ring tone file header file.
The phone does not require rebooting after downloading a ring tone.
To remove the User 1 ring tone from the phone, set the
http://phone_ip_addr/ringtone1?/delete
Click Submit All Changes.
Configuring On-Demand Ring Tones (Cisco SPA525G/
525G2)
The Cisco SPA525G/525G2 supports on-demand ring tones, which means that
ring tones are downloaded and played from a TFTP server when a call comes in.
To configure:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Ring Tone, in one or more of the ten ring tone fields, enter the following:
n=office;w=[tftp://]host[:port]/path;c=0
and specify the URL to download in the host/port/path field. If the connection
cannot be established, a default ring tone is played.
Click Submit All Changes.
3
path
to delete, as follows:
71