Cisco SPA303 Administration Manual page 160

Configuring Security, Quality, and Network Features
Configuring SSL VPN on the Cisco SPA525G/525G2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click the System tab.
Under VPN Settings, enter the following:
• In the VPN Server field, enter the IP address of the VPN server.
• In the VPN User Name and Password fields, enter the username and
password to log in to the VPN server. These were created when you set up
the VPN on the server.
• (Optional) Enter the VPN tunnel group, if required by your VPN server.
• (Optional) To connect to the VPN when the phone is powered on, in the
Connect on Bootup field, choose yes.
Click Submit All Changes. If you did not choose yes in the Connect on Bootup field,
connect to the VPN on the phone by pressing the Setup button and choosing
Network Configuration > VPN > Connect.
To use the phone interface:
On the phone, press the Setup button.
Scroll to Network Configuration and press Select.
Scroll to Web Server and ensure that it is enabled. Press the right arrow key if it is
not enabled.
Scroll to VPN and press the right arrow key.
Under VPN server, enter the IP address of the VPN server.
Enter the username to log in to the VPN server.
Enter the password for the user.
(Optional) Enter the tunnel group, if required by the VPN server.
(Optional) To connect to the VPN when the phone is powered on, ensure that
Connect on Bootup is enabled.
To connect to the VPN, ensure that Connect is enabled.
Press Save. After the VPN connection is established, a VPN icon appears in the
upper right of the phone display screen.
5
158