Cisco SPA303 Administration Manual page 50

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click the Phone tab.
To display a text logo, in the Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%0a) between lines
For example, "Super\n%0aTelecom" will display:
Super
Telecom
• Use the + character to add spaces for formatting. For example, you can add
multiple + characters before and after the text to center it.
To display a picture logo:
a. In the BMP Picture Download URL field, enter the path as follows:
http://192.168.2.244/pictures/image04_128x48.bmp (you can also
use TFTP)
b. Change Select Logo to BMP Picture.
Click Submit All Changes. The phone reboots, retrieves the .bmp file, and displays
it when it next boots.
Cisco SPA525G/525G2:
Log in to the configuration utility.
Admin Login and advanced.
Click the User tab. In the Screen section, Text Logo field, enter logo text as follows:
• Up to two lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) and escape code (%0a) between lines
For example, "Super\n%0aTelecom" will display:
Super
Telecom
3
48