Wi-Fi Settings (Cisco Spa525G/525G2 Only); Bluetooth Settings (Cisco Spa525G/525G2 Only); Vpn Settings (Cisco Spa525G/525G2 Only) - Cisco SPA303 Administration Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Network Startup Delay

Wi-Fi Settings (Cisco SPA525G/525G2 Only)

Parameter
SPA525-wifi-on

Bluetooth Settings (Cisco SPA525G/525G2 Only)

Parameter
Enable BT

VPN Settings (Cisco SPA525G/525G2 Only)

Parameter
VPN Server
VPN User Name
VPN Password
Description
Setting this value causes a delay for the switch to
get to the forwarding state before the phone will
send out the first LLDP-MED packet. The default
delay is 3 seconds. For configuration of some
switches, you might need to increase this value to
a higher value for LLDP-MED to work. Configuring
a delay can be important for networks that use
Spanning Tree Protocol.
Description
Set to yes to enable Wireless-G service on the
Cisco SPA525G/525G2.
Description
Set to yes to enable support for Bluetooth devices on
the Cisco SPA525G.
Description
The IP address of the VPN server to which the phone
connects.
Username configured on the VPN server for the
phone.
Password associated with the username configured
on the VPN for the phone.
B
239