Interdigit Short Timer (Complete Entry Timer); Syntax For The Interdigit Short Timer - Cisco SPA303 Administration Manual

Configuring Dial Plans
About Dial Plans
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Interdigit Short Timer (Complete Entry Timer)

You can think of this timer as the "complete entry" timer. This timer measures the
interval between dialed digits. It applies when the dialed digits match at least one
digit sequence in the dial plan. Unless the user enters another digit within the
specified number of seconds, the entry is evaluated. If it is valid, the call proceeds.
If it is invalid, the call is rejected. The default value is 3 seconds.

Syntax for the Interdigit Short Timer

SYNTAX 1: S:s, ( dial plan )
•
Use this syntax to apply the new setting to the entire dial plan within the
parentheses.
SYNTAX 2: sequence Ss
•
Use this syntax to apply the new setting to a particular dialing sequence.
s: The number of seconds; if no number is entered after S, the default timer
of 5 seconds applies.
Examples for the Interdigit Short Timer
• Set the timer for the entire dial plan.
EXAMPLE: S:6,
9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
S:6, While entering a number with the phone off hook, a user can pause for
up to 15 seconds between digits before the Interdigit Short Timer expires.
This setting is especially helpful to users such as sales people, who are
reading the numbers from business cards and other printed materials while
dialing.
• Set an instant timer for a particular sequence within the dial plan.
EXAMPLE: (9,8<:1408>[2-9]xxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
automatically when the user dials the final digit in the sequence.
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-
With the timer set to 0, the call is transmitted
9,8,1[2-9]xxxxxxxxxS0
8
|
205