Regional Tab; Call Progress Tones - Cisco SPA303 Administration Manual

Cisco SPA IP Phone Field Reference

Regional Tab

Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
This section describes the fields for the following headings on the Regional tab:
• Call Progress Tones, page 255
• Distinctive Ring Patterns, page 258
• Control Timer Values (sec), page 259
• Vertical Service Activation Codes, page 260
• Vertical Service Announcement Codes, page 265
• Outbound Call Codec Selection Codes, page 265
• Time (Cisco SPA525G/525G2 Only), page 268
• Language (Cisco SPA525G/525G2 Only), page 268
• Miscellaneous, page 268

Call Progress Tones

Parameter
Dial Tone
Bluetooth Dial Tone (Cisco
SPA525G/525G2 only)
Outside Dial Tone
Prompt Tone
Description
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Tone that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
B
255