Enabling Anonymous Call And Caller Id Blocking Services; Enabling Automatic Call Distribution (Acd) Service - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Enabling Anonymous Call and Caller ID Blocking Services

Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, under the type of call blocking to enable, choose
yes.
• Block ANC Serv—Blocks anonymous calls.
• Block CID Serv—Blocks outbound caller ID.
These features can also be configured from the User tab, under Supplementary
Services.
Click Submit All Changes.

Enabling Automatic Call Distribution (ACD) Service

Typically used for call centers, Automatic Call Distribution (ACD) handles incoming
calls and manages them based on a database of instructions. You can enable this
with the SIP B parameter (
Defaults to no (disabled).
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, in the ACD Login Serv field, choose yes.
In the ACD Ext field, choose the extension used for handling ACD calls. Select 1-6,
depending on your phone model. Defaults to 1.
Click Submit All Changes.
"Configuring SIP" section on page 101
3
).
55