Cisco SPA303 Administration Manual page 227

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
NTP Enable (Cisco SPA525G/
525G2 only)
Primary NTP Server (Cisco
SPA525G/525G2 only)
Secondary NTP Server
(Cisco SPA525G/525G2 only)
TFTP Server (Cisco
SPA525G/525G2 only)
Bluetooth Enabled (Cisco
SPA525G/525G2 only)
Bluetooth Firmware Version
(Cisco SPA525G/525G2 only)
Bluetooth Connected (Cisco
SPA525G/525G2 only)
Bluetooth MAC (Cisco
SPA525G/525G2 only)
Connected Device ID (Cisco
SPA525G/525G2 only)
Wireless Enabled (Cisco
SPA525G/525G2 only)
Wireless Connected (Cisco
SPA525G/525G2 only)
Wireless MAC (Cisco
SPA525G/525G2 only)
SSID (Cisco SPA525G/
525G2 only)
Standard Channel (Cisco
SPA525G/525G2 only)
Security Mode (Cisco
SPA525G/525G2 only)
Description
Shows if Network Time Protocol is enabled.
IP Address of the primary NTP server.
IP Address of the secondary NTP server.
Address of the TFTP server for provisioning.
Shows if Bluetooth is enabled.
Displays the Bluetooth firmware version.
Shows if a Bluetooth device is connected to the phone.
Shows the hardware address of the Bluetooth device.
Shows the name of the connected Bluetooth device.
Shows if Wireless-G is enabled on the phone.
Shows if the phone is connected to the wireless
network.
Shows the hardware address of the Wireless-G
controller.
Shows the SSID, or name of the wireless router to
which the phone is connected.
Shows the wireless channel being used in the wireless
connection.
Shows if wireless security is configured on the phone
(yes or no).
B
225