Led Status Indicator; Power Connector - Dalsa Piranha HS Series User Manual

Piranha HS-xx RoHS User Manual

2.2.1 LED Status Indicator

The cam era is equ ipped w ith a red / green LED u sed to d isplay the operational statu s of
the cam era. The table below su m m arizes the operating states of the cam era and the
correspond ing LED states.
When m ore than one cond ition is active, the LED ind icates the cond ition w ith the highest
priority. Error and w arning states are accom panied by correspond ing m essages fu rther
d escribing the cu rrent cam era statu s.
Table 3: Diagnostic LED
Priority
1
2
3
4

2.2.2 Power Connector

Figure 10: Hirose 6-pin Circular Male—Power Connector
Hirose 6-pin Circular Male
Mating Part: HIROSE
The cam era requ ires a single voltage inpu t (+12 to +15VDC). The cam era m eets all
perform ance specifications u sing stand ard sw itching pow er su pplies, althou gh w ell-
regu lated linear su pplies provid e optim u m perform ance.
!
WARNING: When setting up the camera's power supplies follow these guidelines:






Note: Camera performance specifications are not guaranteed if your power supply does not
meet these requirements.
Teledyne DALSA
All manuals and user guides at all-guides.com
Color of Status LED
Flashing Red
Solid Red
Flashing Green
Solid Green
1 6
5
2
4
3
HR10A-7P-6S
Apply the appropriate voltages
Protect the cam era w ith a
Do not u se the shield on a m u lti-cond u ctor cable for grou nd .
Keep lead s as short as possible to red u ce voltage d rop.
linear
Use high-qu ality su pplies to m inim ize noise.
Use an isolated type pow er su pply to prevent LVDS com m on m od e range violation.
Meaning
Fatal Error. Camera temperature is too high and
camera thermal shutd ow n has occurred or a pow er
on failure has been d etected .
Warning. Loss of functionality.
Camera initialization or executing a long command
(e.g., flat field correction command s ccp or ccf)
Camera is operational and functioning correctly .
Table 4: Hirose Pin Description
Pin Description
1 Min +12 to Max +15VDC
2 Min +12 to Max +15VDC
3 Min +12 to Max +15VDC
fast-blow fuse
betw een pow er su pply and cam era.
19
Pin Description
4 GND
5 GND
6 GND
03-032-20013-03