Table of Contents
Advertisement
12
Power Connector
Figure 4: Hirose 6-pin Circular Male—Power Connector
The camera requires a single voltage input (+12 to +15VDC). The camera meets all performance
specifications using standard switching power supplies, although well-regulated linear supplies provide
optimum performance.
WARNING: When setting up the camera's power supplies follow these guidelines:
Apply the appropriate voltages
•
Protect the camera with a fast-blow fuse between power supply and camera.
•
Do not use the shield on a multi-conductor cable for ground.
•
Keep leads as short as possible to reduce voltage drop.
•
Use high-quality linear supplies to minimize noise.
•
Use an isolated type power supply to prevent LVDS common mode range violation.
•
Note:
Camera performance specifications are not guaranteed if your power supply does not meet these
requirements.
Teledyne DALSA offers a power supply with attached 6' power cable that meets the Piranha HS camera's
requirements, but it should not be considered the only choice. Many high quality supplies are available
from other vendors.
Camera Link Data Connector
The Camera Link interface is implemented as a Base, Medium or Full Configuration in the Piranha HN
camera. The following table summarizes the different configurations and lists the configurations available
to each Piranha HS model number.
03-032-20135-00
Table 3: Hirose Pin Description
Pin
Description
1
Min +12 to Max +15VDC
2
Min +12 to Max +15VDC
3
Min +12 to Max +15VDC
Figure 5: Camera Link MDR26 Connector
Piranha HN RoHS User Manual
Pin
Description
4
GND
5
GND
6
GND
Teledyne DALSA
Hide quick links:
Advertisement
Table of Contents
