Zoom Setting; Interval Setting - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

ZOOM setting

This item is set in the MOTION SETTING screen.
MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN
PRESET
MENU
Use the cursor button (j or l) to move the cursor to
ZOOM, then use the cursor button (d or c) to select the
zoom magnification power (e.g. x2).
Available settings: OFF, x1.4, x2, x2.8, x4, x6
Note:
• When a suspicious motion is detected, the camera zooms in
according to the set magnification power. The zoom takes
effect for 5 seconds and then returns to the previous
magnification level.
• The zoom focuses on the center of the screen. If the
maximum optical performance is exceeded, zooming will stop
at maximum magnification.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
SET ‚
ON ‚
SET ‚
OFF
5S
OFF
OFF
BACK

INTERVAL setting

This item is set in the MOTION SETTING screen.
MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN
PRESET
MENU
Use the cursor button (j or l) to move the cursor to
INTERVAL, then use the cursor button (d or c) to select the
time interval (e.g. 15S).
Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M
Note: When a motion is detected, no other motions will be
detected within the set interval of time.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
SET ‚
ON ‚
SET ‚
OFF
5S
OFF
OFF
BACK
52