B Color/Black & White Selection Setting (Day/Night) - Sanyo VCC-ZM400P Instruction Manual

OPTION SETTING
B
Color/black & white selection setting
(DAY/NIGHT)
The ALARM IN terminal on the rear panel can be used to force
the image mode to color mode or black & white mode. Use this
setting when using this terminal to force the mode selection.
However, when this setting is being used, external alarm input
cannot be received.
1
LENS
FOCUS MANU ‚
ZOOM SET
DAY/NIGHT COLOR‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
1
Set DAY/NIGHT in the LENS setting screen to "COLOR".
First change the DAY/NIGHT setting in the LENS setting screen
to "COLOR". (See p23)
2
Color/black & white selection setting
Use the cursor button (j or l) to move the cursor to
ALM for ALARM IN, and then use the cursor button (d
or c) to set the input (e.g. COLOR).
• ALM: The control terminal (ALARM IN) is used for alarm input.
• COLOR: The control terminal (ALARM IN) is used for
color/black & white selection input. External operations can
then be used to forcibly switch the mode to color mode or
black & white mode.
59
2, 3
ALARM SETTING
ALARM IN ALM
POLARITY NO
‚ MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
PRESET OFF
MENU BACK
3
POLARITY setting
Use the cursor button (j or l) to move the cursor to
POLARITY, then use the cursor button (d or c) to select
"NO" or "NC".
Available settings:
• NO: Normally open (Normally open, and mode switches
between color and black & white when closed)
• NC: Normally closed (Normally closed, and mode switches
between color and black & white when opened)
Between ALARM
POLARITY setting
IN - COM terminals
When set to NO Open
Closed
When set to NC Open
Closed
Note:
• If DAY/NIGHT has been set to "COLOR", color/black &
white selection will not be possible.
• If COLOR is selected, settings relating to external alarm
input will not be displayed, and it will not be possible to
receive external alarm inputs.
• The color/black & white selection setting is applied from the
point after the menu is exited.
Mode after
selection
COLOR
B/W
COLOR
B/W