Sense Up Setting; Level Setting - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

SENSE UP setting

IRIS SETTING
BLC
SENSE UP
(LEVEL)
í-----ú+------ü
PRESET
MENU
Use the cursor button (j or l) to move the cursor to
SENSE UP, then use the cursor button (d or c) to select the
power of the electronic sensitivity. (e.g. x4)
Available settings: OFF, x2, x4, x8, x16, x32
Note:
• Electronic sensitivity boosting (SENSE UP) automatically
lengthens the CCD exposure time in dark situations.
Accordingly, do not use for light target objects. Because
exposure time is lengthened while in operation, moving target
objects may cause conspicuous afterimages and blurs.
• It is not possible to set SENSE UP (activated) or SHUTTER
(LONG) when MOTION is set to "ON".
• When SENSE UP is activated for IRIS SETTING, the electronic
shutter cannot be forcibly moved.
• If DAY/NIGHT is set to "AUTO" and the images are in color
mode, electronic sensitivity boosting will not operate.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
MULT
x4
40
OFF
BACK

LEVEL setting

IRIS SETTING
BLC
SENSE UP
(LEVEL)
í----ú-+------ü
PRESET
MENU
Use the cursor button (j or l) to move the cursor to
LEVEL, then use the cursor button (d or c) to adjust the iris
level.
Available settings: 0 – 100
Note: The larger the number, the more it brightens.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
MULT
x4
40
OFF
BACK
40