Password Lock Cancellation; Password Changes - Sanyo VCC-ZM400P Instruction Manual

PRIVACY MASK SETTING (PRIVACY MASK)

PASSWORD LOCK cancellation

For use when PASSWORD LOCK is ON
1
PASSWORD
¤¤¤¤ SET ‚
-
MENU BACK
1
Press the SET button.
The PASSWORD screen will appear.
2
Enter the factory set password "1234".
Use the cursor button (j or l) to select "1", then use
the cursor button (c).
To move the cursor to the next "*" digit.
3
Use the same steps to enter "2", "3" and "4", then press
the SET button.
"OK" will appear and BACK for MENU will be blinking. Press
the SET button again. The PRIVACY MASK SETTING screen
will reappear and "OFF" will be blinking for PASSWORD LOCK.
3
PASSWORD
1234 SET ‚
-
OK
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚

PASSWORD changes

You can change the password with PASSWORD LOCK in either
the ON or OFF setting.
1
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
(NOW PASSWORD)
**** SET ‚
-
1
Use the cursor button (j or l) to move the cursor to
SET for PASSWORD CHANGE and press the SET button.
The PASSWORD (NOW PASSWORD) screen will appear.
2
Use the cursor button (d or c, j) to enter the current
password (e.g. 1234), then press the SET button.
The PASSWORD (NEW PASSWORD) screen will appear.
3
Use the cursor button (d or c, j) to enter a new
password (e.g. 4321), then press the SET button.
"OK" will appear and BACK for MENU will be blinking. Press
the SET button again.
The PRIVACY MASK SETTING screen will reappear.
2
PASSWORD
(NOW PASSWORD)
1234 SET ‚
-
PASSWORD
(NEW PASSWORD)
**** SET ‚
-
16