Alarm Sign Setting - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

ALARM SIGN setting

This item is set in the MOTION SETTING screen.
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN
PRESET
MENU
Use the cursor button (j or l) to move the cursor to OFF
for ALARM SIGN, and then use the cursor button (d or c)
to select ON.
Available settings:
• ON: The camera ID display blinks when motion is detected.
• OFF: The camera ID display does not blink when motion is
detected.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
53
MOTION SETTING
SET ‚
ON ‚
SET ‚
OFF
5S
OFF
OFF
BACK