Download  Print this page

Sanyo VCC-ZM300A Instruction Manual

Hide thumbs

Advertisement

Quick Links

INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
COLOR CCD ZOOM camera
Caméra CCD COULEURS avec ZOOM
Cámara CCD ZOOM A COLOR
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
À propos de ce manuel
Avant d'installer et d'utiliser la caméra, veuillez lire ce manuel
attentivement. Gardez-le à portée de main pour toute référence
ultérieure.
Acerca de este manual
Lea cuidadosamente este manual antes de instalar y usar
la cámara. Asegúrese de guardarlo a su alcance para
futuras consultas.
VCC-ZM300A

Advertisement

loading

  Related Manuals for Sanyo VCC-ZM300A

  Summary of Contents for Sanyo VCC-ZM300A

  • Page 1 VCC-ZM300A INSTRUCTION MANUAL MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES COLOR CCD ZOOM camera Caméra CCD COULEURS avec ZOOM Cámara CCD ZOOM A COLOR About this manual Acerca de este manual Before installing and using the camera, please read this manual Lea cuidadosamente este manual antes de instalar y usar carefully.
  • Page 2: Table Of Contents

    CONTENTS Manual iris setting ..............30 INFORMATION TO USER ............WHITE BALANCE adjustment ............31 PRECAUTIONS ................MWB setting ................32 PARTS NAMES AND FUNCTIONS ........... ATW setting................32 CONNECTIONS ................. AWC setting ................34 Basic connection for monitoring or recording......Electronic SHUTTER setting ............
  • Page 3: Information To User

    This installation should be made by a qualified service person and accept any interference received, including interference that should conform to all local codes. may cause undesired operation. Changes or modifications not expressly approved by Sanyo may void the user’s authority to operate this camera.
  • Page 4: Precautions

    Disconnect the such as spotlights, etc., or where it could be subject to direct power cord immediately, and consult your dealer (or a Sanyo sunlight, as that could cause deformation, discoloration or other Authorized Service Centre).
  • Page 5: Parts Names And Functions

    PARTS NAMES AND FUNCTIONS Simple zoom/focus adjustment Control You can use just the cursor button to easily adjust the zoom terminals and focus without using the setting screen. • Zoom adjustment Press (d): Wide ZOOM Press (c): Tele FOCUS ALARM RS485 VIDEO OUT POWER...
  • Page 6 PARTS NAMES AND FUNCTIONS Camera installation bracket Control terminals (See p7) 1 Zoom terminal (ZOOM) The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and Sets the zoom to wide angle or telescoping.
  • Page 7: Connections

    CONNECTIONS Basic connection for monitoring or recording TV monitor (sold separately) AC 24 V connection DC 12 V connection AC24V AC24V DC12V CLASS 2 WIR DC12V CLASS 2 WIR Fig. 1 Fig. 2 (Video signal connections) Time lapse VCR or : VIDEO IN Digital video recorder : VIDEO OUT...
  • Page 8: Connection Of Peripheral Equipment And Controller Terminal

    CONNECTIONS Coaxial cable type and maximum length Connection of peripheral equipment and • Cable type RG-59U (3C-2V), 250 m maximum. controller terminal • Cable type RG-6U (5C-2V), 500 m maximum. External alarm • Cable type RG-11U (7C-2V), 600 m maximum. switch Buzzer or lamp •...
  • Page 9: Displaying/Closing The Menu Screen

    DISPLAYING/CLOSING THE MENU SCREEN MAIN MENU screen Sub-menu screen MAIN MENU LANGUAGE LANGUAGE ‚ LANGUAGE ENGLISH CAMERA ID LANGUE FRENCH SYNC IDIOMA SPANISH PRIVACY MASK ‚ LENS ‚ MIRROR VIEW SETTING ‚ OPTION ‚ PRESET MENU MENU BACK Cursor button SET button Press the SET button for about 3 seconds.
  • Page 10: Menu Item Flow And Menu Operation

    MENU ITEM FLOW AND MENU OPERATION 1 2 3 4 5 6 7 8 MAIN MENU LANGUAGE ‚ CAMERA ID SYNC PRIVACY MASK ‚ LENS ‚ MIRROR VIEW SETTING ‚ OPTION ‚ PRESET MENU 1 LANGUAGE setting (See p10) 6 MIRROR setting (See p21) Choose from among English, French and Spanish.
  • Page 11: Language Setting

    LANGUAGE SETTING Select one of the languages shown on the menu screen (English, French, Spanish). MAIN MENU LANGUAGE LANGUAGE ‚ LANGUAGE ENGLISH CAMERA ID LANGUE FRENCH SYNC IDIOMA SPANISH PRIVACY MASK ‚ LENS ‚ MIRROR VIEW SETTING ‚ LANGUE OPTION ‚...
  • Page 12: Camera Id Setting

    CAMERA ID SETTING Camera ID setting Camera ID screen Example: Setting the Camera ID to “CAM 1” CAMERA ID SETTING MAIN MENU CAMERA ID SETTING ABCDEFGHIJKLM NOPQRSTUVWXYZ LANGUAGE ‚ ABCDEFGHIJKLM 0123456789 :-‚ CAMERA ID ‚ NOPQRSTUVWXYZ SYNC 0123456789 :-‚ ???????????????? PRIVACY MASK ‚...
  • Page 13: Sync Setting (Sync)

    SYNC SETTING (SYNC) CAMERA ID SETTING Initial setting is internal synchronization (INT), so it does not need Use the cursor button (j or l) to move the cursor to to be set again. Follow the steps below to change the setting to POSITION, and then press the SET button.
  • Page 14: Privacy Mask Setting (Privacy Mask)

    PRIVACY MASK SETTING (PRIVACY MASK) Mask setting MAIN MENU PRIVACY MASK SETTING MASK NO.SELECT MASK 3 SET LANGUAGE ‚ PASSWORD LOCK ‚ (POSITION) CAMERA ID PASSWORD CHANGE SET ‚ MASK SYNC MASK SET SET ‚ MASK PRIVACY MASK ‚ MASK ‚...
  • Page 15 PRIVACY MASK SETTING (PRIVACY MASK) (About the POSITION screen) MASK 3 SET MASK 3 SET It is possible to set as many as 4 masks on the same POSITION (SIZE) screen. MASK 1 ‚ PRESET MENU BACK Use the cursor button (j l d c) to move the gray mask, then press the SET button.
  • Page 16: Password Setting

    PRIVACY MASK SETTING (PRIVACY MASK) PASSWORD setting You can lock the privacy masks in place as gray patterns after they have been set. The password requirement is initially set to OFF, but to begin using it, you must enter the factory set password “1234”. PRIVACY MASK SETTING PASSWORD PASSWORD...
  • Page 17: Password Lock Cancellation

    PRIVACY MASK SETTING (PRIVACY MASK) PASSWORD LOCK cancellation PASSWORD changes For use when PASSWORD LOCK is ON You can change the password with PASSWORD LOCK in either the ON or OFF setting. PASSWORD PASSWORD PRIVACY MASK SETTING PASSWORD PASSWORD LOCK ‚...
  • Page 18: Lens Setting (Lens)

    LENS SETTING (LENS) This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed. FOCUS setting Setting the manual focus (MANU) Sets a limit for near distance focusing and sets focus speed for manual focus. MAIN MENU FOCUS SETTING FOCUS SETTING...
  • Page 19 LENS SETTING (LENS) Setting the autofocus (AUTO) Sets a limit for near distance focusing and sets focusing sensitivity and focus iris. Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time (over 24 hours).
  • Page 20 LENS SETTING (LENS) FOCUS SETTING AREA SETTING AREA SETTING LIMIT NEAR AREA AREA SENSITIVITY AREA ‚ PRESET PRESET PRESET MENU BACK MENU BACK MENU BACK Use the cursor button (j or l) to move the cursor to Use the cursor button (d or c) to select the focus target SET for AREA, and press the SET button.
  • Page 21: Zoom Setting

    LENS SETTING (LENS) ZOOM setting Sets zooming speed and magnification power of the electronic zoom. This item also has a setting for improvement of vertical resolution of still pictures. MAIN MENU ZOOM SETTING ZOOM SETTING LENS SPEED LANGUAGE ‚ SPEED FOCUS MANU ‚...
  • Page 22: Mirror Setting

    MIRROR SETTING LENS SETTING (LENS) ZOOM SETTING MAIN MENU SPEED LANGUAGE ‚ EL ZOOM CAMERA ID V-RESO.UP SYNC PRIVACY MASK ‚ LENS ‚ MIRROR VIEW SETTING ‚ OPTION ‚ PRESET PRESET MENU BACK MENU V-RESO.UP (Vertical resolution) setting Use the cursor button (j or l) to move the cursor to MIRROR, then use the cursor button (d or c) to select Use the cursor button (j or l) to move the cursor to V-RESO.UP, then use the cursor button (d or c) to...
  • Page 23: View Setting Item Flow

    VIEW SETTING ITEM FLOW IRIS setting (See p24) This setting allows selection of IRIS to either autoiris (AUTO) or manual iris (MANU). Initial setting is MAIN MENU autoiris. LANGUAGE ‚ CAMERA ID SYNC WHITE BALANCE adjustment (See p31) PRIVACY MASK ‚...
  • Page 24 VIEW SETTING ITEM FLOW (About creating image setting files in VIEW SETTING) Note: When each of the following functions is ON (shown by single circle), it may be possible to use other functions in You can set 9 different patterns with view files. Use the cursor conjunction with it (shown by double circle).
  • Page 25: View Setting

    VIEW SETTING IRIS setting There are 2 possible settings for IRIS, autoiris (AUTO) and manual iris (MANU). Autoiris setting (AUTO) Sets backlight compensation, magnification of electronic sensitivity and iris level. VIEW SETTING 1 IRIS AUTO ‚ WHITE BALANCE ‚ SHUTTER LONG ‚...
  • Page 26 VIEW SETTING Backlight compensation additional settings 1 • • • • Multi-spot evaluative metering (MULT) IRIS SETTING BLC SETTING MULT ‚ (BLC WEIGHT) SENSE UP í------ú------ü (LEVEL) (BRIGHT) í------ú------ü í-----ú+------ü Use the cursor button (j or l) to move the cursor to Use the cursor button (j or l) to move the cursor to BLC, then use the cursor button (d or c) to select a BRIGHT, and then use the cursor button (d or c) to...
  • Page 27 VIEW SETTING Backlight compensation additional settings 2 • • • • 5 spot centerweighted average metering (CENT) IRIS SETTING BLC SETTING BLC SETTING CENT ‚ (POSITION) (SIZE) SENSE UP (LEVEL) í-----ú+------ü PRESET MENU BACK Use the cursor button (d or c) to select CENT, then Use the cursor button (j l d c) to adjust the size of press the SET button.
  • Page 28 VIEW SETTING Example of setting the mask in the center weighting position. BLC WINDOW WEIGHTING BLC WINDOW WEIGHTING BLC WINDOW WEIGHTING BLC WINDOW WEIGHTING BOTTOM BOTTOM BOTTOM BOTTOM LEFT LEFT LEFT LEFT RIGHT RIGHT RIGHT RIGHT CENTER(FIX) CENTER(FIX) CENTER(FIX) CENTER(FIX) PRESET PRESET PRESET...
  • Page 29 VIEW SETTING Backlight compensation additional settings 3 • • • • 48 multi-spot metering (MASK) IRIS SETTING BLC MASKING BLC MASKING MASK ‚ SENSE UP (LEVEL) í-----ú+------ü CONTINUE (ñ) CONTINUE (ñ) PRESET MENU BACK Use the cursor button (d or c) to select MASK, then Finishing mask pattern setting press the SET button.
  • Page 30: Sense Up Setting

    VIEW SETTING SENSE UP setting LEVEL setting IRIS SETTING IRIS SETTING MULT MULT SENSE UP SENSE UP (LEVEL) (LEVEL) í-----ú+------ü í----ú-+------ü PRESET PRESET MENU BACK MENU BACK Use the cursor button (j or l) to move the cursor to Use the cursor button (j or l) to move the cursor to LEVEL, then use the cursor button (d or c) to adjust the iris SENSE UP, then use the cursor button (d or c) to select the level.
  • Page 31: Manual Iris Setting

    VIEW SETTING Manual iris setting Sets electronic iris ON/OFF, lens aperture and iris level. MAIN MENU VIEW SETTING 1 IRIS SETTING IRIS SETTING LANGUAGE ‚ IRIS MANU ‚ CAMERA ID WHITE BALANCE ‚ SYNC SHUTTER LONG ‚ (IRIS STOP) (IRIS STOP) PRIVACY MASK ‚...
  • Page 32: Bwhite Balance Adjustment

    VIEW SETTING WHITE BALANCE adjustment Adjustments can be made to 3 methods of white balance correction: Auto trace white balance (ATW), one-push automatic white balance (AWC), and manual white balance (MWB). MAIN MENU VIEW SETTING 1 LANGUAGE ‚ IRIS AUTO ‚ CAMERA ID WHITE BALANCE ‚...
  • Page 33: Mwb Setting

    VIEW SETTING White balance additional settings 1 White balance additional settings 2 MWB setting ATW setting Automatic white balance settings are completed when ATW is VIEW SETTING 1 MWB SETTING selected. However, white balance will not be suitably adjusted if a IRIS AUTO ‚...
  • Page 34 VIEW SETTING ATW MASKING ATW MASKING ATW SETTING ATW SETTING MASKING ‚ MASKING ‚ SMART ATW SMART ATW CONTINUE (ñ) CONTINUE (ñ) PRESET PRESET MENU BACK MENU BACK SMART ATW setting Use the cursor button (j l d c) to move the mask pattern over the bright light source, then press the SET If saturation is high or a scene is bright, the most suitable colors button.
  • Page 35: Awc Setting

    VIEW SETTING White balance additional settings 3 AWC setting VIEW SETTING 1 AWC SETTING MWB SETTING AWC SETTING IRIS AUTO ‚ AWC LOCK AWC LOCK (OFFSET) WHITE BALANCE ‚ SHUTTER LONG ‚ GO TO MWB ‚ GO TO MWB ‚ R í---ú--+------ü...
  • Page 36: C Electronic Shutter Setting

    VIEW SETTING Electronic SHUTTER setting Sets the electronic shutter to either the fast shutter speed mode (SHORT) or the slow shutter speed mode (LONG). Fast shutter speed (SHORT) mode setting MAIN MENU VIEW SETTING 1 ES SETTING LANGUAGE ‚ IRIS AUTO ‚...
  • Page 37: Slow Shutter Speed (Long) Mode Setting

    VIEW SETTING Slow shutter speed (LONG) mode setting VIEW SETTING 1 ES SETTING IRIS AUTO ‚ SHUTTER SPEED WHITE BALANCE ‚ SHUTTER LONG ‚ MOTION APERTURE ‚ ‚ GAMMA PRESET PRESET MENU BACK MENU BACK Note: Use the cursor button (j or l) to move the cursor to SHUTTER (LONG) cannot be set if any of the following settings is SHUTTER, then use the cursor button (d or c) to select active.
  • Page 38: Motion Detector Setting

    VIEW SETTING MOTION detector setting This function divides the monitor screen into 48 zones (8 x 6). Based on information from the separate zones, target images that show intruder movements are detected and an alarm is generated. The degree of motion to be detected can be finely set. Note: •...
  • Page 39 VIEW SETTING Set the size of the target object desired for detection MOTION SIZE MOTION SIZE MOTION SIZE 1 Determine the vertical size Tilt the cursor button to the right (c). PRESET PRESET PRESET The “V” value (vertical pattern) will change to “2” and the MENU BACK MENU...
  • Page 40: Motion Masking Setting

    VIEW SETTING MOTION MASKING setting Masking target objects that are not desired for detection (swaying trees, flickers of light , etc.) will prevent unwanted alarms from being generated. This is done in the MOTION SETTING screen. MOTION SETTING MOTION MASKING MOTION MASKING SIZE ‚...
  • Page 41: Sensitivity Setting

    VIEW SETTING SENSITIVITY setting Available settings: 1 – 10 Set the degree of sensitivity for motion detection corresponding Brightness differences (Y-DIFFER) to MOTION SIZE. Sensitivity can be set so that natural motions on Use the cursor button (j or l) to move the cursor to the screen such as wind and light changes will not be detected.
  • Page 42: Zoom Setting

    VIEW SETTING ZOOM setting INTERVAL setting This item is set in the MOTION SETTING screen. This item is set in the MOTION SETTING screen. MOTION SETTING MOTION SETTING SIZE ‚ SIZE ‚ MASKING ‚ MASKING ‚ SENSITIVITY ‚ SENSITIVITY ‚ ZOOM ZOOM INTERVAL...
  • Page 43: Alarm Sign Setting

    VIEW SETTING ALARM SIGN setting This item is set in the MOTION SETTING screen. MOTION SETTING SIZE ‚ MASKING ‚ SENSITIVITY ‚ ZOOM INTERVAL ALARM SIGN PRESET MENU BACK Use the cursor button (j or l) to move the cursor to OFF for ALARM SIGN, and then use the cursor button (d or c) to select ON.
  • Page 44: E Profile Compensation Setting (Aperture)

    VIEW SETTING Profile compensation setting (APERTURE) Set this function to further emphasize the profile of the target object. The amount of compensation can be adjusted for horizontal or vertical directions. MAIN MENU VIEW SETTING 1 APERTURE SETTING LANGUAGE ‚ IRIS AUTO ‚...
  • Page 45: F Automatic Gain Control (Agc) Setting

    VIEW SETTING Automatic gain control (AGC) setting Sets AGC to ON or OFF and adjusts the gain. (When ON is set) (When OFF is set) GAIN SETTING MAIN MENU GAIN SETTING VIEW SETTING 1 LANGUAGE ‚ IRIS AUTO ‚ MAX GAIN ±0·...
  • Page 46: Ggamma Correction Setting

    VIEW SETTING GAMMA correction setting In addition to turning gamma correction ON or OFF, contrast sensitivity can be boosted at 2 levels. MAIN MENU VIEW SETTING 1 LANGUAGE ‚ IRIS AUTO ‚ CAMERA ID WHITE BALANCE ‚ SYNC SHUTTER LONG ‚ PRIVACY MASK ‚...
  • Page 47: Option Setting

    OPTION SETTING MAIN MENU RS-485 SETTING RS-485 SETTING OPTION LANGUAGE ‚ CONTROL ‚ BAUD RATE 19200 BAUD RATE 19200 CAMERA ID ADDRESS SYNC ALARM ‚ TERMINATE TERMINATE PRIVACY MASK ‚ LENS ‚ MIRROR VIEW SETTING ‚ OPTION ‚ CONTROL setting Use the cursor button (j or l) to move the cursor to Use the cursor button (d or c) to select 19200 for BAUD OPTION, then press the SET button.
  • Page 48: Address Setting

    OPTION SETTING ALARM setting MAIN MENU OPTION Alarm input setting (ALARM IN) LANGUAGE ‚ CONTROL ‚ CAMERA ID ADDRESS SYNC ALARM ‚ Make the following settings for alarm detection. PRIVACY MASK ‚ LENS ‚ Connect the external alarm switch to the alarm input terminal on MIRROR VIEW SETTING ‚...
  • Page 49 OPTION SETTING • • • • Alarm duration setting (DURATION) ALARM SETTING Set the duration for the following alarm input reception. ALARM IN POLARITY MOTION Use the cursor button (j or l) to move the cursor to DURATION ALARM OUT DURATION, then use the cursor button (d or c) to select POLARITY ALARM TIME...
  • Page 50 OPTION SETTING MAIN MENU OPTION ALARM SETTING ALARM SETTING LANGUAGE ‚ CONTROL ‚ ALARM IN ALARM IN ZOOM CAMERA ID ADDRESS POLARITY POLARITY SYNC MOTION ALARM ‚ ZOOM x1.4 PRIVACY MASK ‚ DURATION DURATION LENS ‚ MIRROR VIEW SETTING ‚ OPTION ‚...
  • Page 51: B Alarm Output Setting (Alarm Out)

    OPTION SETTING Alarm output setting (ALARM OUT) ALARM SETTING ALARM SETTING ALARM IN ALARM IN POLARITY POLARITY MOTION MOTION DURATION DURATION ALARM OUT ALARM OUT POLARITY POLARITY ALARM TIME ALARM TIME LINE OUT LINE OUT Use the cursor button (j or l) to move the cursor to Use the cursor button (j or l) to move the cursor to ALARM OUT, then use the cursor button (d or c) to ALARM TIME, then use the cursor button (d or c) to...
  • Page 52: Operation Of Alarm Signal Output To The System Controller Setting (Line Out)

    OPTION SETTING Operation of alarm signal output to the System Controller setting (LINE OUT) Outputs alarm signal to the System Controller. The ALARM lamp on the System Controller will blink when it receives an alarm signal. An alarm list can be displayed to show information such as date/time alarm was received, the device sending the alarm and the alarm type.
  • Page 53: Menu Flow

    MENU FLOW LANGUAGE CAMERA ID SETTING L-L SETTING LANGUAGE ENGLISH ABCDEFGHIJKLM (V SYNC PHASE) LANGUE FRENCH NOPQRSTUVWXYZ IDIOMA SPANISH 0123456789 :-‚ ú------+------ü ???????????????? POSITION ‚ MENU BACK MAIN MENU PRIVACY MASK SETTING PASSWORD PASSWORD LANGUAGE ‚ PASSWORD LOCK ‚ CAMERA ID PASSWORD CHANGE SET ‚...
  • Page 54 MENU FLOW CENT MASK VIEW SETTING 1 IRIS SETTING BLC SETTING BLC SETTING BLC MASKING IRIS AUTO ‚ (BLC WEIGHT) (POSITION) WHITE BALANCE ‚ SENSE UP í------ú------ü SHUTTER LONG ‚ MOTION (LEVEL) (BRIGHT) MULT APERTURE ‚ í------ú------ü ‚ í------ú------ü GAMMA CONTINUE (ñ) PRESET IRIS SETTING...
  • Page 55: Specifications

    SPECIFICATIONS Pickup device 1/4" Motion detector ON/OFF, ON allows setting of detection patterns on a 48 zone screen for 6 motion Effective pixels 768 (H) x 494 (V) settings (size, masking, sensitivity, zoom, Horizontal resolution Over 520 TV lines interval, alarm sign) Lens 22 power zoom lens, f=4.0 –...
  • Page 56: Main Features

    MAIN FEATURES SPECIFICATIONS • Built in Interline transfer method 1/4” CCD, approx. 410,000 Dimensions picture elements. 54 mm 125.3 mm • High sensitivity, minimum required illumination is 2.0 lux. 6 mm 116 mm 9.3 mm (F1.6, gain max) • More than 520 TV lines of horizontal resolution. •...
  • Page 57 Printed on recycled paper Imprimé sur du papier recyclé Impreso en papel reciclado SANYO Electric Co., Ltd. 1AC6P1P2752-- Printed in Japan L5AA2/US2 (0704KP-CZ)a...

This manual is also suitable for:

Vcc-zm300p