Zoom Setting - Sanyo VCC-P7575PA Instruction Manual

Specifying Alarm Input <ALARM>

ZOOM setting

1
Select "ZOOM" and specify the zoom factor for
alarm detection (included motion-detected).
·ZOOM
• Select from: OFF (no zoom), x1.0, x1.4, x2.0, x2.6
2
Select "uZOOM TIME" and specify duration time
for zooming (if you specified "ZOOM" to other
than "OFF" in step 1).
• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M
(S = second, M = minute)
Note: You should not specify longer "ZOOM TIME" than "DURATION" time.
Otherwise, "DURATION" setting will change correspondingly.
Confirm both times before specifying proper values.
31
ALARM SETTING
ALARM IN
NO
MOTION ON
uAREA
SET y
uSENSITIVITY SET y
·ZOOM
OFF
uZOOM TIME
5S
DURATION 5S
ALARM SIGN
OFF
PRESET OFF
MENU
BACK
3
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.