Specifications - Sanyo VCC-ZM400P Instruction Manual

SPECIFICATIONS

:
Pickup device 1/4"
:
Effective pixels 752 (H) x 582 (V)
:
Horizontal resolution Over 520 TV lines
:
Lens x22 zoom lens, f=3.6 – 79.2mm (F1.6 – 3.8)
Electronic zoom and gearing
Zoom speed setting possible
:
Electronic zoom 16 power (combined with optic zoom gives
352 power max)
Max zoom magnification setting possible
Vertical resolution ON/OFF setting
:
Autofocus AUTO/MANUAL
AF area setting possible (3 step)
:
Iris control AUTO/MANUAL, 1/2 EV steps
:
Synchronization method Internal synchronization/Line lock,
V phase adjustment possible
:
Lowest image illumination 1.2 lx (F1.6, AGC gain at maximum, COLOR
mode)
0.06 lx (F1.6, B/W mode)
0.04 lx (F1.6, x32 electronic sensitivity
increased, COLOR mode)
0.002 lx (F1.6, x32 SENSE UP, B/W mode)
:
S/N Over 48dB
:
Backlight compensation Multi-spot evaluative metering
5 spot centerweighted average metering
48 multi-spot metering
:
Day/Night AUTO / COLOR / B/W settings available
: •
Electronic shutter
•
Electronic sensitivity
:
boosting AUTO/OFF, works with auto iris
Up to x32 max setting possible
:
White balance ATW/AWC/MWB
:
AGC gain OFF/–6/
Fast shutter speed mode (SHORT);
1/50, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
Slow shutter speed mode (LONG);
x1, x2, x4, x8, x16, x32
±
0/+6/+9/+12/+15dB
:
Motion detector ON/OFF, ON allows setting of detection
patterns on a 48 zone screen for 6 motion
settings (size, masking, sensitivity, zoom,
interval, alarm sign)
:
Privacy masking ON/OFF, max of 4 masked locations
Password lock possible
Alarm input/output
(back panel control
:
terminals) Alarm input: 1 (for external alarm switch)
Alarm output: 1 (for sending a signal to the
system controller or an alarm detection
device such as a buzzer)
:
Mirror image effect Horizontally (H), vertically (V), horizontally
and vertically (HV)
:
Camera ID ON/OFF, 16 characters
:
View settings 9 (0 – 8) screen files can be established, and
each file can set 7 capturing characteristics
such as iris
:
Communications Coaxial control, RS-485
Operational
:
temperature/humidity –10 – +50° C/below 90% RH
:
Power source 24 V AC, 50 Hz/12 – 15 V DC
:
Power consumption 4.5 W
:
Weight 380 g
SERVICE
This camera is a precision instruments and if treated with care,
will provide years of satisfactory performance. However, in the
event of a problem, the owner is advised not to attempt to make
repairs or open the cabinet. Servicing should always be referred to
your dealer or Sanyo Authorized Service Centre.
64