D Operation Of Alarm Signal Output To The System Controller Setting (Line Out) - Sanyo VCC-ZM400P Instruction Manual

OPTION SETTING
D
Operation of alarm signal output to the System
Controller setting (LINE OUT)
Outputs alarm signal to the System Controller. The ALARM lamp
on the System Controller will blink when it receives an alarm
signal. An alarm list can be displayed to show information such as
date/time alarm was received, the device sending the alarm and
the alarm type.
1
ALARM SETTING
ALARM IN ALM
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
Use the cursor button (j or l) to move the cursor to LINE
OUT, then use the cursor button (d or c) to select "ON" or
"OFF".
Available settings:
• ON: Outputs alarm signal to the System Controller
• OFF: Does not output alarm signal to the System Controller
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
61