Sanyo VCC-ZM400P Instruction Manual page 38

VIEW SETTING
Backlight compensation additional settings 2
• • • • 5 spot centerweighted average metering (CENT)
1
IRIS SETTING
BLC CENT ‚
SENSE UP OFF
(LEVEL)
í-----ú+------ü
PRESET OFF
MENU BACK
1
Use the cursor button (d or c) to select CENT, then
press the SET button.
The BLC SETTING (POSITION) screen will appear.
2
Use the cursor button (j l d c) to shift the position
of the central light sensing zone.
The zone can be moved up or down and left or right.
Note:
• If the zone fills the right side it will become smaller.
• If the zone fills the bottom side it will become smaller.
3
Press the SET button.
The BLC SETTING (SIZE) screen will appear.
37
2
BLC SETTING
(POSITION)
40
4
BLC SETTING
(SIZE)
4
Use the cursor button (j l d c) to adjust the size of
the central light sensing zone.
5
Press the SET button.
The BLC WINDOW WEIGHTING screen will appear.