Manual Iris Setting - Sanyo VCC-ZM400P Instruction Manual

VIEW SETTING

Manual iris setting

Sets electronic iris ON/OFF, lens aperture and iris level.
1
MAIN MENU
LANGUAGE SET
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET
LENS SET
MIRROR OFF
VIEW SETTING 1
OPTION SET
1
Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (e.g. 1)
The VIEW SETTING 1 screen will appear.
2
Use the cursor button (d or c) to select MANU, then
press the SET button.
The IRIS SETTING screen will appear.
3
Electronic IRIS setting
Use the cursor button (d or c) to select El. (e.g. ON)
Note: When SENSE UP is activated for IRIS SETTING, the
electronic shutter cannot be forcibly moved.
4
Lens aperture setting
Use the cursor button (j or l) to move the cursor to IRIS
STOP, then use the cursor button (d or c) to select the value.
Available settings: 1 – 17 (Aperture opening)
Note:
• The smaller the value the more the aperture closes and the
image darkens.
• Changes to the value directly control the aperture of the lens.
41
2
VIEW SETTING 1
‚
IRIS MANU ‚
WHITE BALANCE ATW
SHUTTER LONG ‚
‚ MOTION OFF
‚ APERTURE ON
GAMMA ON
‚
‚
3
IRIS SETTING
EI
‚
(IRIS STOP)
í------+------ú
‚
(LEVEL)
í----ú-+------ü
5
Use the cursor button (j or l) to move the cursor to
LEVEL, then use the cursor button (d or c) to select the
value.
Available settings: 0 – 100 (Level of opening)
Note:
• The smaller the value the more the video level drops,
becoming darker.
• The LEVEL setting controls both AGC circuit gain and shutter
speed, changing the amount of exposure.
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note:
• If the iris views an unusually bright image, it can cause a
smear that cannot be corrected by adjusting the light entering
through the lens. In this case, arrange the physical angle of
lighting in a way that will prevent on-screen smearing.
• If flickering of the target object occurs because of florescent
lighting in the camera location, changing to incandescent
lighting will prevent the flickering.
5
IRIS SETTING
ON EI
(IRIS STOP)
17 í------+------ú
(LEVEL)
40 í----ú-+------ü
ON
17
40