Table of Contents
Advertisement
Setting Zooming Up at Alarm Detection
<ZOOM>
1
Select <ZOOM> and specify the zoom factor for
alarm detection (including motion detection).
·ZOOM
• Select from: OFF (no zoom), x1.0, x1.4, x2.0, x2.6
2
Select <uZOOM TIME> and specify duration time
for zooming (when zoom has been set in step 1).
• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M
(S=second, M=minute)
Note:
You should not specify longer <uZOOM TIME> than <DURATION>
time (this page on the right). Otherwise, <DURATION> setting will
change correspondingly. Confirm both times before specifying
proper values.
ALARM SETTING
ALARM IN
1
y
ALARM OUT
NO
MOTION
ON
uAREA
SET
y
uSENSITIVITY
SET
y
·ZOOM
OFF
uZOOM TIME
5S
DURATION
5S
ALARM SIGN
OFF
PRESET
OFF
MENU
BACK
Setting Alarm Duration <DURATION>
1
Select <DURATION> and set the alarm duration.
·DURATION
• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M
(S=second, M=minute)
Note:
• You should not specify shorter <DURATION> than <uZOOM
TIME> (this page on the left). Otherwise, <uZOOM TIME> setting
will change correspondingly. Confirm both times before
specifying proper values.
• Once an alarm output has started, no new alarm can be detected
or output until the duration has elapsed.
Setting Alarm <ALARM>
ALARM SETTING
ALARM IN
1
y
ALARM OUT
NO
MOTION
ON
uAREA
SET
y
uSENSITIVITY
SET
y
ZOOM
OFF
uZOOM TIME
5S
·DURATION
5S
ALARM SIGN
OFF
PRESET
OFF
MENU
BACK
40
Advertisement
Table of Contents
