Zoom Setting <Zoom; Duration Setting <Duration - Sanyo VCC-P6784 Instruction Manual

ZOOM setting <ZOOM>
1
Select [ZOOM] and specify the zoom
magnification for alarm detection (including
motion detection).
ALARM SETTING
ALARM IN
NO
MOTION ON
AREA
u SET
u SENSITIVITY
SET
· ZOOM OFF
u ZOOM TIME
5S
DURATION 5S
ALARM SIGN
OFF
PRESET
OFF
MENU BACK
• Select from: OFF (no zoom), x1.0, x1.4, x2.0, x2.6
2
Select [uZOOM TIME] and specify duration time
for zooming (if you specified [ZOOM] to other
than "OFF" in step 1).
• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M
(S = second, M = minute)
y
y
DURATION setting <DURATION>
1
Select [DURATION] and specify the duration for
the alarm sign indication (a time until next alarm
input becomes enabled).
ALARM SETTING
ALARM IN
NO
MOTION ON
u AREA
SET
u SENSITIVITY
SET
ZOOM OFF
u ZOOM TIME
5S
· DURATION 5S
ALARM SIGN
OFF
PRESET
OFF
MENU BACK
• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M
(S = second, M = minute)
Note: Once an alarm output starts, the camera cannot detect or output
new alarms until the set duration elapses.
Relationship between [uZOOM TIME] and [DURATION]
You need to set time for these items so that the following relationship
is satisfied. Make sure the set values are correct.
[uZOOM TIME] ≤ [DURATION]
Setting Alarm <ALARM>
y
y
GB
26