Server Handling Precautions; Input Power Information And Precautions - Fujitsu SPARC Enterprise T5140 Installation Manual

Server Handling Precautions

Caution – Deploy the antitilt bar on the equipment rack before beginning an
installation.
Caution – The SPARC Enterprise T5240 server weighs approximately 55 lb (25 kg).
Two people are required to lift and mount this 2U server into a rack enclosure when
using the procedures in this document.
Caution – When completing a two-person procedure, always communicate your
intentions clearly before, during, and after each step to minimize confusion.
Related Information
"Input Power Information and Precautions" on page 3
■
SPARC Enterprise T5140 and T5240 Servers Getting Started Guide
■
SPARC Enterprise T5140 and T5240 Servers Getting Started Guide (DC)
■
Input Power Information and
Precautions
The SPARC Enterprise T5140 and T5240 servers are available in the following input
power configurations:
Two redundant, hot-swappable AC power supplies
■
Preparing for Installation 3