Specifications - NEC MultiSync FP1350 Service Manual

SPECIFICATION
Monitor Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colors Analog input: Unlimited number of Colors
Synchronization
Range
Resolutions Supported
Resolution based on horizontal
and vertical frequencies only
Active Display Area Horizontal:
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MultiSync
Diagonal: 55.3 cm / 22 inch
50.8 cm / 20 inch
Radius: 57800 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync.
(Negative) 0.3 Vp-p
Horizontal: 31 kHz to 115 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 160 Hz
832 x 624 @ 55 to 160 Hz
1024 x 768 @ 55 to 143 Hz
1152 x 870 @ 55 to 125 Hz
1280 x 1024 @ 55 to 107 Hz
1600 x 1200 @ 55 to 92 Hz .........
1792 x 1344 @ 55 to 81 Hz
1800 x 1440 @ 55 to 76 Hz
1856 x 1392 @ 55 to 78 Hz
1920 x 1440 @ 55 to 76 Hz
396 mm
Vertical: 297 mm
406 mm
305 mm
AC 100 - 120 V / 220 - 240 V, 50/60 Hz
2.3A @ 100 - 120 V / 1.0A@ 220-240 V
483 mm (W) x 501 mm (H) x 472 mm (D)
34.0 kg
10°C to + 35°C
Humidity:
30% to 80%
Altitude:
0 to 3000 m
-20°C to + 60°C
Humidity:
10% to 90%
Altitude:
0 to 13700 m
NOTE: Technical specifications are subject to change without notice.

TM
FP1350 Monitor
1-1
Notes
90° deflection, 0.25 - 0.27 mm
(variable) grille pitch, Medium-Short
persistence phosphor, aperture grille
CRT, multi-layered, anti-static screen
coating, semi-dark-tint screen, and

OptiClear screen surface.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC cites recommended resolution
a 85 Hz for optimal display
performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.