NEC MultiSync FP1350 Service Manual page 8

®
4. Connect one end of the power cord to the MultiSync FP Series monitor and the other end to the power outlet
(Figure D.1).
5. Turn on the monitor (Figure E.1) and the computer.
6. The Factory Setting for your monitor is set for D-SUB installation. If you are using a BNC cable connection,
push the BNC/D-SUB button on the front of the monitor (Figure E.1) to switch settings.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual.
2-3