Polycom SpectraLink 8020 Administrator's Manual page 67

Parameter
PROXYn_
MAIL_ACCESS
PROXYn _
MAIL_NOTIFY
PROXYn_
REREG_SECS
Not used in
8020/8030
PROXYn_FAILOVER
IP_ADDRESS
server automatically creates and renews subscriptions when the handset registers, then only the
PROXYn _MAIL_NOTIFY contact need be specified. If the handset must subscribe to a particular contact to get mail
notification, then only the PROXYn_MAIL_SUBSCR contact needs to be specified.
Values as above.
4
For Inter-Tel SIP servers, both PROXYn_MAIL_SUBSCR and PROXYn_MAIL_NOTIFY parameters must be set in
5
the configuration file.
PN: 1725-36038-001-H.doc
Value
name@xxx.xxx.xxx.xxx
or
sip:name@domain
name@xxx.xxx.xxx.xxx
or
sip:name@domain
35 seconds to
3600 seconds
*default 3600 seconds
xxx.xxx.xxx.xxx:pppp
or
proxyname:pppp
Programming the SIP Handset Features
Description
Contact to whom the
handset should invite to
access the mail center.
This is the main voicemail
dial number.
Contact from whom mail
notification originates. See
config file example for
more information.
The requested expiration
interval in REGISTER
request messages.
The IP address of the
Interactive Intelligence
failover call server.
Notes
n = 1, 2, 3
name = mail server contact
name.
xxx.xxx.xxx.xxx = IP
address
Domain where the mail
resides.
4
n = 1, 2, 3
name = mail server contact
5
name.
xxx.xxx.xxx.xxx = IP
address.
Domain where the mail
resides.
n = 1, 2, 3
If the server has a lower
maximum setting or a
higher minimum setting
than that requested, the
server response takes
precedence.
See example file
n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional, 5060
is the default)
proxyname = computer
name (DHCP only)
67