Polycom SpectraLink 8020 Administrator's Manual page 68

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Parameter
AUTH
[see warning note
below]
CODECS
LINEn
LINEn _PROXY
LINEn _CALLID
WARNING: providing credentials by using the AUTH parameters in the configuration files is a security risk and
6
should be avoided by entering usernames and passwords in
time. Credentials entered here are in plain text and accessible by anyone who can access the TFTP server files.
Credentials stored in the SIP server or in the handsets are protected.
68
Value
username;password
codec1, codec2
e.g. g711u, g711a,
g729
username
i
callerid
Description
Credentials.
In general credentials are
needed for each
6
registered line. .
Comma-separated list of
supported codecs in order
of preference.
The dial # or name.
All LINEn user names
should be unique for a
given LINEn_ PROXY.
This may be enforced in
future software revisions.
SIP proxy server for this
line.
String that displays at the
far end.
Admin menu or by allowing the user to login at startup
Notes
username = The dial
number or string that
identifies the line
appearance. Generally an
extension or phone
number.
password = a secure
password created by the
system administer which
enables a handset to
register and/or function.
Defaults to "g711u, g711a".
if either is omitted it will be
added to the end of the list.
n = 1, 2, 3, 4, 5
The registered contact
becomes:
sip:username@domain
n = 1, 2, 3, 4, 5
i = the number of the
proxy server 1, 2, 3.
LINEn_PROXY can be
omitted if the line is not to
be registered and you wish
to do direct phone to phone
calls.
n = 1, 2, 3, 4, 5
callerid = the text that will
display as the caller ID on
the called handset.
PN: 1725-36038-001-H.doc