Minimum Configuration Process - Polycom SpectraLink 8020 Administrator's Manual

Minimum Configuration Process

PN: 1725-36038-001-H.doc
1. Download the latest SpectraLink 8020/8030 Wireless Telephone
IP software from
http://www.polycom.com/usa/en/support/voice/wi-
fi/spectralink_8030_wireless.html.
2. Load the latest version of the SIP code and place it on the TFTP
server and ensure the TFTP server is started. The slnk_cfg.cfg is
downloaded first by the phone, and defines the SIP code files that
will be subsequently downloaded. Be sure to use the slnk_cfg.cfg
file that comes with the latest version of the SIP code and do not
change the order of the files within the slnk_cfg.cfg.
The following six files are included in the typical SIP software
package.
Description
Configuration file
PHINTL (language translation)
USB downloader
Over-The-Air Downloader (OTADL)
OTADL Shim
Functional (telephony protocol)
3. Use the Handset Administration Tool to set up the configuration
of each handset to meet all essential requirements. If not using the
Handset Administration Tool, ensure the following parameters
are correctly set in the
Chapter 2 SpectraLink 8020/8030 Wireless Telephone Configuration
for detailed configuration instructions.
If statically assigning IP addresses, ensure that the
—
, and
Subnet Mask
using a DHCP Server, ensure that the DHCP option is set.
Ensure the handset has properly configured
—
information.
Domain
Ensure the
—
Telephony Protocol
ensures the handset will check for the proper SRP files each
time it powers on.
Ensure security settings are properly programmed.
—
Software License and Protocol Management
menu for each handset: See
Admin
information are accurate. If
Default Gateway
menu option is set to
Filename
slnk_cfg.cfg
pi1400sp.bin
pd14udsp.bin
pd14odsp.bin
pd14shim.bin
pd14csp.bin
,
Phone IP
and
SSID Reg
. This
36
57