Handset Operation - Polycom SpectraLink 8020 Administrator's Manual

Handset Operation

If you want to...
Turn the handset on Press and hold the END key until two chirps sound.
Turn the handset off Press and hold the END key. One chirp will sound. If you are in a call, hang up
Unlock the keypad Press the Unlk softkey, then #.
Lock the keypad While in Standby press the Cfg softkey, then press NavOK.
Place a call
Place a call from
Favorites menu
PN: 1725-36038-001-H.doc
Then...
first, then turn off the handset.
1 To dial a number, follow any one of these sequences:
»
Press the START key, wait for a dial tone, then dial the number. Then
press either START again or Nav OK.
»
Dial the number and then press the START key or Nav OK.
»
Press the Spkr softkey, then dial the number. Then press START or Nav
OK.
»
Press the START key; press the Favr softkey; use the Nav
select the number or user from the list; press Nav OK to dial the
number.
2 Listen for the ring to indicate the alerting of the called party.
Note: Line 1 is the default line.
1 Press START or Spkr.
2 Listen for dial tone.
3 Press the FAVR softkey.
4 Use the Nav keys to navigate to the desired entry.
5 Select the entry by pressing NavOK.
6 Press START or NavOK to place the call.
Using the SIP Handset
keys to
91