SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
40
on the phone is deleted. If the RADIUS server has enabled
"anonymous in-band PAC provisioning", then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning, the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual PAC Provisioning section later in
this chapter.
Custom – QoS
mode uses the SVP Server to provide enterprise-grade QoS.
SVP
are used to change the priority settings for various
DSCP tags
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
WT in call = 46
mode uses standards-based traffic controls for QoS,
Wi-Fi Standard QoS
instead of the SVP Server.
are used to change the priority settings for various
DSCP tags
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
Voice = 46
is used to enable and disable the use of WMM
Admission Cntrl
Admission Control by the handset for the AC_VO and AC_VI
access categories. If the WLAN is using WMM Admission
Control, the handset should be set to
not using WMM Admission Control, the handset should be set to
. See the Best Practices Guide for Deploying SpectraLink
*Optional
8020/8030 Wireless Telephones for a detailed explanation of the use
of WMM Admission Control.
CCX
CCX settings configure the handset for operation as a CCX V4
certified client.
WPA2-Enterprise
The
setting can select either
Authentication
authentication method for RADIUS server such as those from
Cisco, Microsoft, or Juniper.
Note that for
Fast Handoff
,
,
WT standby = 26
,
Control = 26, Other = 0
*Mandatory
*EAP-FAST
, the only selection available is *
PN: 1725-36038-001-H.doc
.
Other = 0
.
. If the WLAN is
or
as the
PEAP
.
CCKM
Need help?
Do you have a question about the SpectraLink 8020 and is the answer not in the manual?
Questions and answers