Polycom SpectraLink 8020 Administrator's Manual page 33

PN: 1725-36038-001-H.doc
– the
Emergency Dial Emergency Dial
disable the feature. When enabled, the handset will dial the number
programmed into the
is pressed twice within two seconds.
Caution! Emergency dial just sets up a telephone call and will be
inoperable if the wireless system or the call server fails for any
reason. Do not rely on it as your sole method of emergency
notification.
Follow your dial plan rules when entering the emergency number to
be dialed. E.g. if an outside number is to be dialed and a prefix is
required to obtain an outside line, enter the prefix as part of the
emergency number.
Once an Emergency Number has been entered, it can be modified,
but can only be cleared by restoring the handset to defaults.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time
(GMT) is the default.
Daylight Savings
The handset may be adjusted for daylight savings time.
Password Enable/Disable/Change
The password option controls access to the
by default with the password 123456. The
a toggle between
Enabled
current state. Press
NavOK
modify the password requirement, the default or previously set
password must be entered to verify the change.
appear only if the password is enabled. The password is disabled by
default. The password must be set in each handset for which
controlled access is desired.
SIP Registration
Individual handsets may be configured to correspond with the SIP
configuration information in the TFTP server. The handset is then
SpectraLink Wireless Telephone Configuration
option allows you to enable or
option when the panic button
Emergency Number
Admin
Password
and . The info line will display the
Disabled
to change the password protection state. To
menu. It is enabled
option operates as
will
Change Password
33