Polycom SpectraLink 8020 Administrator's Manual page 31

1 level 2
st
Diagnostics Run Site Survey
Diagnostics Mode
Syslog Mode
Error Handling Mode
Halt on Error/
*Restart on Error
Restore Defaults
Demos Graphics Demo
* default setting
† Only those 802.11a bands that are available in the selected domain will be listed. See Appendix A for
complete information.
‡ Subbands have not been established for the b and b/g mixed or the g-only mode at this writing.
Provision is made in the software to accommodate these ranges once established. Until added, selecting
either of these two modes will immediately bring up Transmit Power options.
PN: 1725-36038-001-H.doc
level 3
nd rd
*Disable
Enable
*Disabled
Errors
Events
Full
SpectraLink Wireless Telephone Configuration
level 4 level
th
[802.11 Config]
a
‡b & b/g mixed
g only
5 level
th
[ 802.11a]†
5.150–5.250
5.250–5.350 DFS
5.470–5.725 DFS
5.470-5.650 DFS
5.725–5.825
5.725-5.850
[Transmit Power]
5mW (7dBm)
10mW (10dBm)
20mW (13dBm)
*30mW (15dBm)
40mW (16dBm)
50mW (17dBm)
100mW (20dBm)
31