Syslog Mode - Polycom SpectraLink 8020 Administrator's Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Syslog Mode

112
A syslog server must be present on the network in order for the
handset to send the log messages and have them saved. The syslog
server will be found with DHCP option 7 if the handset is using
DHCP. If static addresses are configured, the syslog server's IP
address can be configured statically in the
If the syslog server address is blank (
) or the handset is using DHCP and no option 7 is
255.255.255.255
received from the DHCP server, the handset will not send any
syslog messages.
menu options:
Admin
• * – turns syslog off.
Disabled
• – causes the handset to log only events that we consider to
Errors
be an error (see below).
• – logs all errors plus some other interesting events (see
Events
below).
•
– logs all the above plus a running stream of other quality
Full
information (see below).
The table below lists the syslog messages and which level of logging
will produce them:
Message type
Failed Handoff
Successful Handoff
Security Error
Call Start/End
Audio stats
Audio error threshold exceeded
Radio stats
Radio error threshold exceeded
Error Handling Mode
menu.
Admin
000.000.000.000
Errors Events Full
Yes Yes Yes
No Yes Yes
Yes Yes Yes
No Yes Yes
No No Yes (every 5 secs)
Yes Yes Yes
No No Yes (every 5 secs)
Yes Yes Yes
Yes Yes Yes
PN: 1725-36038-001-H.doc
or