Polycom SpectraLink 8020 Administrator's Manual page 71

## ADDITIONAL INFORMATION ABOUT EACH OF THESE FIELDS AS WELL AS SPECIFIC
## CONFIGURATION EXAMPLES CAN BE FOUND FURTHER DOWN IN THIS FILE
#-----------------------------------------------------------------------------------------#
#-----------------------------------------------------------------------------------------#
## FOR PROXY1_TYPE = NECSIP
#PROXY1_ADDR = 172.29.102.122:5060
Address
#PROXY1_KEYPRESS_2833 = enable
#PROXY1_KEYPRESS_INFO = disable
#PROXY1_HOLD_IP0 = disable
#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = necpolysip:5060
#PROXY1_CALLID_PER_LINE = disable
#PROXY1_MAIL_ACCESS = 7999
#PROXY1_CONF_IP_ADDRESS
## For each proxy of type NECSIP, one PROXYn_CONF_IP_ADDRESS is required
## This value is the address of NEC PBX's IP PAD card.
#-----------------------------------------------------------------------------------------#
## FOR PROXY1_TYPE = ASTERISK
#PROXY1_ADDR = 172.29.65.6:5060
Address
#PROXY1_KEYPRESS_2833 = enable
#PROXY1_KEYPRESS_INFO = disable
#PROXY1_HOLD_IP0 = disable
#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = axlx.engr.local
#PROXY1_CALLID_PER_LINE = disable
#PROXY1_MAIL_ACCESS = 7999
#-----------------------------------------------------------------------------------------#
## FOR PROXY1_TYPE = MITEL
#PROXY1_ADDR = 172.29.102.160:5060
#PROXY1_KEYPRESS_2833 = enable
#PROXY1_KEYPRESS_INFO = disable
#PROXY1_HOLD_IP0 = enable
#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN =
#PROXY1_CALLID_PER_LINE = disable
#PROXY1_MAIL_ACCESS = 7000
#-----------------------------------------------------------------------------------------#
## FOR PROXY1_TYPE = CCME
#PROXY1_ADDR = 172.24.144.107:5060
#PROXY1_KEYPRESS_2833 = disable
#PROXY1_KEYPRESS_INFO = enable
#PROXY1_HOLD_IP0 = enable
#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14
PN: 1725-36038-001-H.doc
# replace the ip address with your Sip Server's
# Replace this with your SIP Domain's name
# Put Your Voice Mail Sytem's Pilot Number here
= 172.29.102.131
# replace the ip address with the Asterisk Server's
# Replace this with your SIP Domain's name
# Put Your Voice Mail Sytem's Pilot Number here
# replace the ip address with your PBX's Address
# Put Your SIP Domain's Name Here
# Put Your Voice Mail Sytem's Pilot Number here
# replace the ip address with the UCME's Address
Programming the SIP Handset Features
71