Polycom SpectraLink 8020 Administrator's Manual page 42
Hide thumbs
Also See for SpectraLink 8020:
- Administration manual (145 pages) ,
- User manual (71 pages) ,
- Deployment manual (46 pages)
Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
42
Mexico, India
08 –
802.11 config
Once the regulatory domain is set, the
displayed. Only one may be chosen.
default. Press
to set the mode. If the mode has subbands, the
NavOK
list will open. If the mode does not have subbands, the
Subband
r list will open.
Transmit Powe
Use
mode if all of your infrastructure and client devices will
g only
use only 802.11g. The handsets will operate up to 54 Mb/s in this
mode. If any 802.11b capable clients or infrastructure are used in
your wireless LAN then do not use
mode for optimum performance.
and b/g mixed
Use
if some of your infrastructure components only
b & b/g mixed
understand 802.11b. The handsets will operate up to 11 Mb/s.
Subbands have not been established for the
mode at this writing. Provisions are made in the software to
g only
accommodate these ranges once established. Newly added
subbands may not appear in the
Subband
Once a mode is set the subband list will display, if applicable.
Only those ranges which are allowed in the set regulatory domain
and that pertain to the set mode are displayed. Note that for
802.11a the bands labeled
regulatory domain. Multiple subbands may be set. Navigate to the
desired subband and set with
will open. Once the
returned to the subband list.
To deselect a subband, navigate to it and press
Once the subband settings are as desired, press the
exit to the
Network Setup
Transmit power
For subbands: The
pressed from the
required for each subband. Only one level may be set per
subband. Only those power levels which apply to the
regulatory domain and 802.11 mode are listed. Navigate to the
802.11 Config
802.11(b & b/g mixed)
mode, instead use
g only
menu table above.
Admin
will vary depending on the set
DFS
The
NavOK.
setting is done, you will be
Transmit Power
menu.
list opens when
Transmit Power
menu. A transmit power setting is
Subband
modes are
is the
802.11b
or the
b and b/g mixed
menu
Transmit Power
.
NavOK
softkey to
Done
is
NavOK
PN: 1725-36038-001-H.doc
Advertisement
Table of Contents
Need help?
Do you have a question about the SpectraLink 8020 and is the answer not in the manual?
Questions and answers