Desk Charger; Desk Pdm Charger - Aastra DT390 User Manual

Figure 10 Battery replacement
Note:
18.3

Desk Charger

The desk charger is used only for charging. The charger is delivered with a
plug-in power supply and is connected into an ordinary wall socket.
Figure 11 Desk Charger
Note:
18.4

Desk PDM Charger

The Desk PDM charger is used for charging, but can also be used for
software download, and synchronizing of parameters. The charger is
delivered with a plug-in power supply and is connected into an ordinary
wall socket.
Figure 12 Desk PDM Charger
Note:
Using the Desk PDM charger for software download and synchronizing
parameters is most often done by system administrators, and requires that
the charger is connected either to the LAN and CPDM or to a PC with the
WinPDM software application installed. For a short description of CPDM
and WinPDM, see Section 17.8.
1424_EN_LZT103089 Rev B1 2009-05-20
Do not disconnect the battery unless it needs to be replaced.
Only use the chargers within the temperature range of 5 - 40º C.
Only use the charger within the temperature range of 5 - 40º C.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
97