TD 92476GB Cordless Telephone DT390 PRELIMINARY Introduction This document describes features and settings available for the Cordless Telephone DT390. The cordless telephone is designed to be used in office environment and has high quality voice. Read the 2 Safety Instructions on page 2 before using the DT390 handset.
Cordless Telephone DT390 PRELIMINARY Safety Instructions Read this chapter before using the DT390 handset. For safe and efficient operation of the handset, observe the guidelines given in this manual and all necessary safety precautions when using the handset. Follow the operating instructions and adhere to all warnings and safety precautions located on the product, the Quick Reference Guide and this User Manual.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 2.1.1 Frequency Range The handset is a radio transmitter and receiver. When it is on, it receives and sends out radio frequency (RF) energy. The handset operates on different frequency ranges depending on market and employs commonly used modulation techniques:...
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Privacy of communications may not be ensured when using this handset. Exposure to Radio Frequency Signals This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured when used at the ear is 0.043 W/kg.
Page 9
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Battery • Do not immerse the battery into water. This could short-circuit and damage the battery. • Do not expose a battery to an open flame. This could cause the battery to explode.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Descriptions Figure 2. Description of the cordless telephone. Headset connector The headset connector is for connecting a headset. The connector is protected against dust by using the headset connector cover. Left Soft key...
The full graphic type display is 112 pixels wide and 115 pixels high. The display is monochrome black and white, with backlighting. The Cordless Telephone DT390 IMPORTANT: The handset may retain small magnetic objects around the mouthcap or earcap region.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Chargers 3.2.1 Desktop Charger Advanced Basic Figure 3. Desktop chargers. There are two desktop chargers available, one basic charger that will only charge the cordless telephone, and one with advanced functionality to communicate with the system and for software download.
Page 13
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY The display normally shows date and time, the Owner ID and telephone number. The Owner ID can manually be set by the user. Status bar 11:00 Header bar 05/12/2007 System A Active area...
Page 14
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Icons “Signal strength” icon is visible when the cordless telephone is connected to a system. The staples shown in display depends on the signal strength. Full “Battery” icon is displayed in the upper right corner.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY The “Settings” menu contains personal phone settings such as changing the ringer volume, selecting language, etc. * System dependent. Keys and Buttons 3.4.1 Off-hook key This key is used for connecting calls. One short press in standby mode opens the call list.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 3.4.6 Soft Keys Menu Soft keys Figure 5. Soft keys. The three Soft keys are located just beneath the display and the functions of each Soft key is indicated by text in the display just above the keys.
This is done in the PDM see Configuration Manual, Cordless telephone DT390, TD 92532GB. The default PDM setting for this parameter is microphone on a boom i.e. the audio is optimized for using a headset with microphone on a boom.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Menu Tree Calls menu > —> 7891 01:30 • Call • Call list —> 7827 03:35 —> > • More • Time of call 7682 05:26 Edit number > • • Back 7845 20-Oct-03 >...
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Contacts menu • Call contact • Search ——> • From contact list > ——> • Add contact • Name > ——> • New • Work number > • From Call list >...
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY In Call menu The In Call menu can be reached during an ongoing call by pressing the middle Soft Key marked "More". —> • Open the contacts menu > • Contacts • Microphone on/off >...
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Basic Operation Switch the telephone on/off Press and hold , the telephone will vibrate when it is on and the display lights up. A long press in standby mode will turn the telephone off, a control question will first be displayed to confirm switch On/Off.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Calling Open the Call List The 25 last received, dialled or missed calls are stored in a call list. Press the call list. Step with and select one of the numbers. If a number occurs more than once, the last time stamp, together with the total number of occurrences, is shown.
During A Call Note: Some of these functions are system dependent. The parameters are set up in the Portable Device Manager (PDM), see Configuration Manual, Cordless telephone DT390, TD 92532GB, and Installation and Operational Manual, Portable Device Manager (PDM), Windows version, TD 92325GB.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 6.4.5 Switch between Calls A new call is started during conversation, the first call is on hold. Press the soft key "More", and select "Switch" . Press "Select". This will switch between the calls.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Loudspeaking Function How to activate the loudspeaking function is dependent of the choice of answering method. An incoming call can be connected with loudspeaking function active by pressing left Soft key. During a call, a press on the left Soft key activates the loudspeaking function.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 6.8.3 Delete Contact Enter “Contacts” in the menu, see 4.2 Contacts menu on page 15, and select “Delete contact". The names in the list are shown in alphabetical order, step with and select Name/Number.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Menu Operation 13:00 Contacts Calls Settings select Back Figure 7. The main menu. Calls Enter the menu by pressing the “Menu” Soft key. Select in the menu, and press the Soft key "Select".
Call services Note: These functions are system dependent. The parameters are set up in the Portable Device Manager (PDM), see Configuration Manual, Cordless telephone DT390, TD 92532GB, and Installation and Operational Manual, Portable Device Manager (PDM), Windows version, TD 92325GB.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Select "Divert calls". Select "Internal/External". Select "Activate". Enter number to divert to. Press "OK" To stop diversion select "Deactivate" and press the Soft key "OK". Contacts Enter the menu by pressing the “Menu” Soft key.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Settings Enter the menu by pressing the "Menu" soft key. Select in the menu, see 4.3 Settings menu on page 16. 7.3.1 Sound and Alert Adjust the Ringer Volume Select “Sound & Alerts”.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 7.3.2 Headset Select between: • Mic on boom • Mic on Cable • Customized headset profile Select "Headset". Select headset from list. Press "Select". 7.3.3 Display Contrast Select “Display”. Select “Contrast”. Step with to adjust the contrast.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 7.3.5 Phone Lock settings Activate the Automatic Key lock Select “Locks”. Select "Automatic key lock". Select "On" for activation of automatic key lock. Activate the Phone Lock The phone can be protected for unauthorized use. If this function is activated a PIN code has to be entered at power on, or when the handset is placed in a charger - this behaviour will first be activated when the handset is placed in the charger.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Answering key The answering behaviour is by default set to Hook-off. It can also be set to Any key by first selecting "Answering key Hook-off", and then "Any key". Press "Back" to save the setting.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 7.3.10 System Only available systems are displayed. It is possible to switch between the systems if they are configured in the PDM, see Installation and Operational Manual, Portable Device Manager (PDM), Windows version, TD 92325GB and Installation and Operation Manual (CPDM), System version, TD 92473GB.
Page 37
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Priority The default order of priority is the order of entered subscriptions. This means that the first subscribed system has the highest priority. This list can be edited by the user. It is possible to set the systems in priority by moving them up or down in the list.
*#06# in standby mode. The “IPEI” can also be found in the Admin menu. Software Upgrade Software and parameters in the Cordless telephone DT390 can be upgraded by using the Portable Device Manager (PDM). The PDM exists in two versions, a Windows version and a System version.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Operation Notice 11.1 Accessibility and Voice Quality The base network is not always available. If you do not get in contact with your system, contact your system administrator. For best voice quality, avoid positioning near computer, radio or similar equipment.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Maintenance 12.1 Charge the Battery Place the telephone in the desktop charger or in the rack charger. The battery is being charged when the LED on the telephone is steady orange. When the battery is fully charged the LED will be green.
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY 12.3 Attach the Hinge-type Clip Attach the hinge clip as described in the illustration below. Figure 9. Click-on the clip. 12.4 Attach the Swivel-type Clip Attach the swivel clip as described in the illustration below.
Page 42
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY Index Antenna............7 Battery ............7, 36 low battery ........10, 36 C (Clear) button ..........11 Call info ..........10, 14 Call service ............ 25 Calling answered call ........... 10 call a number from the call list ....19 dial a number...........
Page 43
User Manual TD 92476GB Cordless Telephone DT390 PRELIMINARY user identity ..........9 Writing Text/Numbers pause............12 2008-06-12/ Ver. PA11...