Follow-Me Service - Aastra DT390 User Manual

Cordless phone for md evolution
Hide thumbs Also See for DT390:
Table of Contents

Advertisement

10.5

Follow-Me Service

In the case you have forgotten to define your variable call forward before
leaving your extension, you may ask the attendants to define it for your
account. This refers to the third party call forward service that is reserved
specifically for them.
As the case may dictate, you may also remotely define your call forward
recipient from his/her internal extension. This is the Follow me service.
The call forward remotely defined is always an immediate call forward.
If your DT390 phone is not available, you can still answer your calls by
forwarding them from another DT390 phone. The call forwarding can be
done to the phone (only internal position) from which you activate the
"Follow-me" service or to an other phone (internal or external position)..
Activating Follow-Me from the DT390 phone the calls are forwarded to
This is activated as described below, from an idle, remote extension, which
will be your call forward recipient:
1. Dial 6 5 assigned to the Follow me service.
2. Dial your own extension number, and press
3. Enter your user password.
4. Press
5. Wait for the Service Acceptance Tone.
6. Press
In the opposite case, a call issued from an incompatible external party will
be redirected to your facility's attendants, who will see your message that
is automatically displayed on their extension, and will be able to accurately
inform your external calling parties.
You may then cancel this call forward from your extension, in the same
way as you would a variable call forward activated directly from your own
extension.
You may also cancel it from the receiving extension according to the
previously described procedure, or by dialling 6 6 that is assigned to
cancelling the Follow me service, which should always be followed by your
own extension number and user password.
1424_EN_LZT103089 Rev B1 2009-05-20
By default, your user password is 1234, however you may have
modified it. (See Section 14.5).
to activate the service.
The third party set confirms your service programming and/or plays the
service acceptance tone.
The third party set confirms your service programming and/or plays the
service acceptance tone.
to finish the procedure.
.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
56

Advertisement

Table of Contents
loading

Table of Contents