15.4.2
Activating Manual Key Lock
It is recommended to always have the automatic lock on, but it is possible
to manually lock and unlock the keypad as well. To lock the keypad
manually:
15.4.2.1
Unlock
To unlock the keypad, do the following:
15.4.3
Activating Phone Lock
Activating Phone lock will protect the phone from unauthorized use. When
this function is activated, the PIN code has to be entered at power on.
When activating Phone lock the PIN code that must be entered. The PIN
code is by default (0000) but it can be changed to any 4-8 digit code, see
Section 15.4.4.
To activate the phone lock, do the following:
1424_EN_LZT103089 Rev B1 2009-05-20
1. Press
.
2. Press Lock.
The
indicates that the keypad is locked.
It is possible to answer or reject incoming calls while the
Note:
keypad is locked. If configured in the WinPDM or CPDM, it is
also possible to make an emergency call while the keypad is
locked.
1. Press
2. Press Yes.
1. Press Menu, select Settings, and press Select.
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select On, or On in charger, and press Select.
6. Enter PIN code, and press OK.
7. Press Back to save the settings.
When the phone is locked,
is shown in the display.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
88