Password Programming - Aastra DT390 User Manual

Note:
14.5

Password Programming

You will be prompted to enter your user password when accessing certain
services, most particularly
By default, your user password is 1234.
Note:
To change password, do the following from your idle extension:
1424_EN_LZT103089 Rev B1 2009-05-20
The implementation of this specific service assumes that your
facility uses the Least Cost Routing (LCR) method for external
calls. It also assumes that, at the very least, these outgoing calls
are subjected to call detailed records that are managed within an
external charging server. Contact your system administrator for
more information. He/she will also provide you with the accepted
account code format.
As indicated, your extension is equipped with a charge counter
that accrues a cumulative total of the charges for your outgoing
calls. Your system administrator or facility's attendants have the
ability to consult any charge counter. If necessary, contact them
for more details.
Your extension may also be subject to call detailed records. This
usually involves your outgoing external calls, however they may
also refer to your internal and incoming calls. These records save
the details for each involved call: number called, date and time,
length, and so on. These records are generally used by your
system administrator to monitor your telephone facility's invoicing.
If necessary, contact your system administrator for more details.
•
When placing a call in substitution or with signature from your
extension or a third party set.
•
When activating/deactivating a call forward from your extension or a
third party set (follow me service).
•
When consulting or personalizing your mailbox within your facility's
integrated voice mail system, when applicable.
It is strongly recommended that you change it to any other 4 digit
code including the * or # key - to ensure that use of the mentioned
services is as secure as possible, and to preserve the
confidentiality of your mailbox, when applicable.
1. Dial the 7 9 assigned to the user password management service.
2. Enter your current user password.
3. Enter your new user password.
4. Press .
Wait for the Service Acceptance Tone.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
80