Different Ring Signals For Internal Call, External Call And Call Back; Switching Vibrator On And Off; Key Sound - Aastra DT390 User Manual

15.1.2 Different Ring Signals for Internal Call, External Call and Call
Back
To set different ring signals for different calls, do the following:
15.1.3

Switching Vibrator On and Off

To switch the vibrator on and off, do the following:
15.1.4

Key Sound

This means that each time a key is used, the phone gives a small sound.
To enable this function, do the following:
1424_EN_LZT103089 Rev B1 2009-05-20
4. Step with ► to increase the volume and ◄ to decrease it.
5. Press OK to save the settings.
1. Press Menu, select Settings and press Select.
2. Select Sound & Alerts, and press Select.
3. Select Ring Signals, and press Select.
Different signals for internal calls, external calls and call back can
be set.
4. Select Internal call, External call or Callback, and press Select.
5. Select a ring signal, press Select, and press Back to save the
setting.
1. Press Menu, select Settings, and press Select.
2. Select Sound & Alerts, and press Select.
3. Select Vibrating alert, and press Select.
4. Choose between On, On when silent (that is, the vibrator is on
when the phone is muted), or Off, and press Select.
5. Press Back to save the setting.
1. Press Menu, select Settings, and press Select.
2. Mark Sounds & Alerts, and press Select.
3. Mark Key sound, and press Select.
4. Choose between Click, Tone or Silent.
It is possible to listen to the key sound by pressing Play
5. Press Select.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
85