End Inquiry Call; Refer Back; Transfer - Aastra DT390 User Manual

OR
Note:
When the third party answers, it is possible to switch between the calls
(refer back), transfer the call, create a conference, and end one of the
calls.
Note:
9.5.1

End Inquiry Call

When wanting to end the inquiry call, do the following:
1. Press More during the call.
2. Select End call and press Select.
Note:
9.5.2

Refer back

When having made an inquiry to another party, and wanting to switch
between the calls, do the following:
1. Press More, select Switch and press Select.
Note:
9.6

Transfer

Note:
To transfer an ongoing call to another extension, do the following:
1424_EN_LZT103089 Rev B1 2009-05-20
2. Select New call and press Select.
3. Do one of the following:
•
Enter the third party's phone number and press
1. Press the soft key, select a contact, press Select, and then
press Call.
It is only possible to select a contact from the local and company
phonebook, but not from the central phonebook, when making an
inquiry.
If New call does not show when pressing More, it is possible to
press R and dial the third party to initiate the inquiry.
The third party is disconnected, and you are connected to the first
party.
If End call is not shown when pressing More, press R, dial number
and press 1 to return to the first call.
If Switch does not show when pressing More, press 2, dial number
and press 2 to switch between the calls.
This feature needs to be configured in the WinPDM or CPDM.
Please contact your system administrator.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
.
45