Dialing During A Connected Call; Conversation Recording - Aastra DT390 User Manual

Note:
9.10

Dialing During a Connected Call

Note:
When calling interactive teleservices, for example phone banks, you need
to use Dual Tone Multi Frequency (DTMF) signals. If the phone exchange
is not already programmed to automatically convert entered digits into
DTMF signals, this function needs to be activated during the call.
To dial digits during a connected call, do the following:
Note:
Note:
9.11

Conversation Recording

If your telephone system is equipped with Integrated Voice Mail and you
have a Mailbox, the conversation recording service allows you to record
any telephone conversation so that you can listen to it again from your
Mailbox. The recorded conversation is processed just as any voice
message in your mailbox.
1424_EN_LZT103089 Rev B1 2009-05-20
1. Press More, mark New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press
When the third party has answered, continue with the following
to establish a conference:
3. Press More, mark Conference and press Select.
4. Repeat the procedure to add more conference members.
If Conference does not show when pressing More, you can also
do the following to establish a conference:
Press R, dial the number to include, and press 3.
This feature needs to be programmed via the WinPDM or CPDM.
Please contact your system administrator.
1. Press More, select DTMF, and press Select.
2. Enter the required digits.
Entered digits are transferred as DTMF signals.
If DTMF does not show when pressing More, press * and enter
the required digits.
When you interact with the voice mail system, or the automated
attendant possibly integrated in your facility, DTMF dialing is
automatic.
.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
48