Phone Locks; Activating Automatic Key Lock - Aastra DT390 User Manual

15.4

Phone Locks

There are two different phone locks:
15.4.1

Activating Automatic Key Lock

The keypad can be set to lock 20 seconds after it was last used. When in
idle mode a locked keypad is indicated by . To activate the automatic key
lock, do the following:
1424_EN_LZT103089 Rev B1 2009-05-20
3. Select Date format, and press Select.
The formats to select from are the following:
• DD/MM/YYYY. (That is, 17/09/2009 (also called Europe)).
• MM/DD/YYYY. (That is, 09/17/2009 (also called US)).
• YYYY-MM-DD. (That is, 2009-09-17 (ISO 8601)).
• MMM DD YYYY. (That is, Sept 17 2009).
• DD MMM YY. (That is, 17 Sept 09).
• DD.MM.YYYY. (That is, 17.09.2009).
• DD-MM-YYYY. (That is, 17-09-2009).
4. Press Back to save the setting.
•
Key lock; to prevent keys to be pressed by mistake.
•
Phone lock; to protect the phone from unauthorized use.
When the phone lock function is activated, a PIN code must be
entered at power on.
1. Press Menu, select Settings, and press Select.
2. Select Locks and press Select.
3. Select Automatic key lock and press Select.
4. Select On, and press Select.
5. Press Back to save the setting.
It is possible to answer or reject incoming calls while the
Note:
keypad is locked. If configured in the WinPDM or CPDM, it is
also possible to make an emergency call while the keypad is
locked.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
87