Incoming Calls; Answering Calls; Call Pick-Up - Aastra DT390 User Manual

5

Incoming Calls

A flashing indicator, accompanied by a ring signal and a vibrating handset,
indicates an incoming call. The ring type can tell if the call is an internal,
external or callback call. Both ring signal and vibrator can be disabled. The
calling party's number, name, or both, is displayed. The name of the caller
will be shown if the calling party's phone number is stored in any of the
phonebooks. When a headset is connected to the handset, the answering
button on the headset can be used to answer the call.
The 25 last received phone numbers are stored in the call list, together with
the latest dialled and missed phone numbers, see Section 6.1.1.
5.1

Answering Calls

When receiving a call, do the following to answer:
OR
OR
Note:
Other answering methods; Automatically or Loudspeaking, can be set from
the Settings tab, see Section 15. When automatic answering is enabled, an
incoming call will be answered automatically after approximately one
second.
5.1.1

Call pick-up

To answer a call to a phone in another room:
1. Dial the prefix 13 for the call pick-up service.
2. Next, directly dial the directory number that is ringing.
3. Press
Note:
1424_EN_LZT103089 Rev B1 2009-05-20
•
Press
•
Press to answer in loudspeaking mode (handsfree).
You are connected to the caller via the loudspeaker.
•
Press the answering button on the headset.
Calls can be answered at any time even during programming, or
while keying in a number. When the phone is in idle mode, you
can change the answering method, see Section 15.6.
You will hear a busy tone.
.
Austria, Italy, U.K., EBN, North America press *8*; Norway press
#13.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
31