Table of Contents
Advertisement
Installation
USB and External Charging Port
Aastra 620d, Aastra 630d: There is a mini USB port (2.0) on the lower right side. It
has two functions:
■
As an interface for connecting to the PC e.g. to load data to/from the device.
When the mobile unit is connected to a PC it is charged simultaneously. The
charging process is slower, however, than when the mobile unit is charged in
the charger.
■
As a connection socket for a USB charger (see Accessories starting on
page 124), e.g. to charge the mobile unit even when it is in a leather pouch.
This charging process is also slower than when charging in the charger.
Be sure to use only a shielded USB cable.
Aastra 630d – USB Port: Removing the Cover
The opening of the USB port is closed with an undetachable cover. If a USB cable is
not used, please be sure to close the opening to be sure the device can be
operated in accordance with its protection class. Remove the cover by tugging it
out of the housing on the upper edge.
Never tug it out on the lower edge!
Setting Up and Connecting the Charger
Aastra 610d, Aastra 620d: The mobile units can be operated without changing
the charger.
Aastra 630d: When operating the mobile
unit, you have to remove the two lateral
guides in the charger. These are easy to lift
up on the inner edge using a fingernail or a
paper clip.
You can also remove the guides by pressing
a suitable screwdriver in the longish holes on the bottom of
the charger.
Connect the power supply unit with the charger and place the connecting cable
through the cable guide. If necessary, change the connector of the power supply
(see Power Supply / Power Supply Unit on page 11).
10
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Advertisement
Table of Contents
